平键
1 GB/T 1095-2003
平键 键槽的剖面尺寸 Square and Rectangular keyways
2 GB/T 1096-2003
普通型 平键 Square and rectangular keys
3 GB/T 1097-2003
导向型 平键 Square and rectangular keys
4 GB/T 1566-2003
薄型平键 键槽的剖面尺寸 Square and Rectangular thin keyways
5 GB/T 1567-2003
薄型 平键 Square and rectangular thin keys
螺栓
1 GB/T 10-1988
沉头方颈螺栓 Flat countersunk square neck bolts
2 GB/T 11-1988
沉头带榫螺栓 Flat countersunk nib bolts
3 GB/T 12-1988
半圆头方颈螺栓 Cup head square neck bolts
4 GB/T 1228-1991
钢结构用高强度大六角头螺栓 High strength bolts with large hexagon head for steel structures
5 GB/T 1231-1991
钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术条件 Specifications of high strength bolts with large hexagon head, large hexagon nuts,plain washers for steel structures
6 GB/T 12869-1991
机床夹具零件及部件 双头螺栓 The parts and units of jigs and fixtures--Double end stud
7 GB/T 12870-1991
机床夹具零件及部件 槽用螺栓 The parts and units of jigs and fixtures--Slot bolt
8 GB/T 13-1988
半圆头带榫螺栓 Cup head nib bolts
9 GB/T 14-1998
大半圆头方颈螺栓 C级 Cup head square neck bolts with large head--Product grade C
10 GB/T 15049.6-1996
CAD 标准件图形文件 几何图形和特性规范 螺栓 CAD standard parts file--Specification of geometry and parameters--Bolts
11 GB/T 15-1988
大半圆头带榫螺栓 Cup head nib bolts with large head
12 GB/T 152.4-1988
紧固件 六角头螺栓和六角螺母用沉孔 Fasteners--Counterbores for hexagon bolts and nuts
13 GB/T 15389-1994
螺杆 Threaded rods
14 GB/T 158-1996
机床工作台 T形槽和相应螺栓 Machine tool tables--T-slots and corresponding bolts
15 GB/T 16674.1-2004
六角法兰面螺栓 小系列 Hexagon bolts with flange-Small series
16 GB/T 16674.2-2004
六角法兰面螺栓 细牙 小系列 Hexagon bolts with flange with metric fine pitch thread-Small series
17 GB/T 16938-1997
紧固件 螺栓、螺钉、螺柱和螺母通用技术条件 Fasteners--General requirements for blots,screws,studs and nuts
18 GB/T 16939-1997
钢网架螺栓球节点用高强度螺栓 High strength bolts for joints of space grid structures
19 GB/T 18230.1-2000
栓接结构用大六角头螺栓 螺纹长度按GB/T 3106 C级 8.8和10.9级 Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)-Product grade C-Property classes 8.8 and 10.9
20 GB/T 18230.2-2000
栓接结构用大六角头螺栓 短螺纹长度 C级 8.8 和 10.9级 Hexagon bolts for high-strength structural bolting with large width across flats(short thread length)-Product grade C-Property classes 8.8 and 10.9
21 GB/T 27-1988
六角头铰制孔用螺栓 A和B级 Hexagon fit bolts--Product grade A and B
22 GB/T 28-1988
六角头螺杆带孔铰制孔用螺栓 A和B级 Hexagon fit bolts with Split pin hole on shank--Product grade A and B
23 GB/T 29.1-1988
六角头头部带槽螺栓 A和B级 Hexagon bolts with slot on head--Product grade A and B
24 GB/T 29.2-1988
十字槽凹穴六角头螺栓 Cross recessed hexagon bolts with indentation
25 GB/T 3098.10-1993
紧固件机械性能有色金属制造的螺栓、螺钉、螺柱和螺母 Mechanical properties of fasteners Bolts, scrows, studs and nuts made of non-ferrous metals
26 GB/T 3098.1-2000
紧固件机械性能 螺栓、螺钉和螺柱 Mechanical properties of fasteners made of carbon steel and alloy steel--Part 1:Bolts,screws and studs
27 GB/T 3098.13-1996
紧固件机械性能 螺栓与螺钉的扭矩试验和破坏扭矩公称直径1～10mm Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm
28 GB/T 3098.6-2000
紧固件机械性能 不锈钢螺栓、螺钉和螺柱 Mechanical properties of fasteners-Bolts,screws and studs made of stainless-steel
29 GB/T 3099-1982
螺栓、螺钉、螺母及附件名词术语 Bolts,screws,nuts and accessories-Terminology and nomenclature
30 GB/T 31.1-1988
六角头螺杆带孔螺栓 A和B级 Hexagon bolts with split pin hole on shank--Product grade A and B
31 GB/T 31.2-1988
六角头螺杆带孔螺栓 细杆 B级 Hexagon bolts with split pin hole on shank--Reduced shank--Product grade B
32 GB/T 31.3-1988
六角头螺杆带孔螺栓 细牙 A和B级 Hexagon bolts with split pin hole on shank--Fine pitch thread--Product grade A and B
33 GB/T 3103.1-2002
紧固件公差 螺栓、螺钉、螺柱和螺母 Tolerances for fasteners- Bolts,screws, studs and nuts
34 GB/T 3103.2-1982
紧固件公差 用于精密机械的螺栓,螺钉和螺母 Tolerances for fasteners--Bolts,screws and nuts for fine mechanics
35 GB/T 3105-2002
普通螺栓和螺钉 头下圆角半径 General purpose bolts and screws-Radii under the head
36 GB/T 3106-1982
螺栓,螺钉和螺柱的公称长度和普通螺栓的螺纹长度
Bolts,screws and studs--Nominal lengths and thread lengths for general purpose bolts
37 GB/T 32.1-1988
六角头头部带孔螺栓 A和B级 Hexagon bolts with wire holes on head--Product grade A and B
38 GB/T 32.2-1988
六角头头部带孔螺栓 细杆 B级 Hexagon bolts with wire holes on head--Reduced shank--Product grade B
39 GB/T 32.3-1988
六角头头部带孔螺栓 细牙 A和B级 Hexagon bolts with wire holes on head--Fine pitch thread--Product grade A and B
40 GB/T 3227-2000
螺栓螺母用装配工具 机动套筒工具的传动四方Assembly tools for screws and nuts-Driving squares for power socket tools
41 GB/T 3228-2000
螺栓螺母用装配工具 冲击式机动四方传动套筒的尺寸Assembly tools for screws and nuts-Machine-operated square drive sockets ("impact")-Dimensions
42 GB/T 3229-2000
螺栓螺钉用装配工具 机动螺刀头的六角传动端Assembly tools for bolts and screws-Hexagon drive ends for machine-operated screwdriver bits
43 GB/T 35-1988
小方头螺栓 B级Square head bolts with small head--Product grade B
44 GB/T 3632-1995
钢结构用扭剪型高强度螺栓连接副Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
45 GB/T 3633-1995
钢结构用扭剪型高强度螺栓连接副 技术条件Technical requirement for sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
46 GB/T 37-1988
T型槽用螺栓Bolts for T--Slot
47 GB/T 3750.3-1983
卡套式铰接六角螺栓Hollow screws
48 GB/T 5276-1985
紧固件 螺栓、螺钉、螺柱及螺母 尺寸代号和标注Fasteners--Bolts,screws,studs and nuts--Symbols and designations of dimensions
49 GB/T 5277-1985
紧固件 螺栓和螺钉通孔Fasteners--Clearance holes for bolts and screws
50 GB/T 5286-2001
螺栓、螺钉和螺母用平垫圈 总方案Plain washers for bolts,screws and nuts--General plan
51 GB/T 5650-1985
扩口式管接头空心螺栓Flared type tube fittings--Inverted flare bolts
52 GB/T 5779.1-2000
紧固件表面缺陷 螺栓、螺钉和螺柱一般要求Fasteners-Surface discontinuities-Bolts,screws and studs for general requirements
53 GB/T 5779.3-2000
紧固件表面缺陷 螺栓、螺钉和螺柱 特殊要求Fasteners-Surface discontinuities-Bolts,screws and studs for special requirements
54 GB/T 5780-2000
六角头螺栓 C级Hexagon head bolts-Product grade C
55 GB/T 5781-2000
六角头螺栓 全螺纹 C级Hexagon head bolts-Full thread-Product grade C
56 GB/T 5782-2000
六角头螺栓Hexagon head bolts
57 GB/T 5783-2000
六角头螺栓 全螺纹Hexagon head bolts-Full thread
58 GB/T 5784-1986
六角头螺栓 细杆 B级Hexagon head bolts--Reduced shank--Product grades B
59 GB/T 5785-2000
六角头螺栓 细牙Hexagon head bolts with fine pitch thread
60 GB/T 5786-2000
六角头螺栓 细牙 全螺纹Hexagon head bolts with fine pitch thread-Full thread
61 GB/T 5789-1986
六角法兰面螺栓 加大系列 B级Hexagon flange bolts--Heavy series--Product grade B
62 GB/T 5790-1986
六角法兰面螺栓 加大系列 细杆 B级Hexagon flange bolts--Heavy series--Product grade B
63 GB/T 6188-2000
螺栓和螺钉用内六角花形Hexalobular internal driving feature for bolts and screws
64 GB/T 7559-1987
纤维增强塑料层板螺栓连接挤压强度试验方法FRP Laminates-test method for bearing strength by bolted joints
65 GB/T 794-1993
加强半圆头方颈螺栓Strengthened cap head square neck bolts
66 GB/T 798-1988
活节螺栓Eye bolts
67 GB/T 799-1988
地脚螺栓Eyelet bolts
68 GB/T 800-1988
沉头双榫螺栓Flat countersunk double nib bolts
69 GB/T 801-1998
小半圆头低方颈螺栓 B级Cup head square neck bolts with small head and short neck--Product grade B
70 GB/T 8-1988
方头螺栓 C级Square head bolts--Product grade C
71 GB/T 8262-1987
圆头椭圆颈螺栓Bolts,round head with oval neck
72 GB/T 892-1986
螺栓紧固轴端挡圈Lock rings at the end of shaft with bolt
73 GB/T 9074.11-1988
十字槽凹穴六角头螺栓和平垫圈组合件Cross recessed hexagon bolt with indention and plain washer assemblies
74 GB/T 9074.1-2002
螺栓或螺钉和平垫圈组合件Bolt or screw and washer assemblies with plain washers
75 GB/T 9074.12-1988
十字槽凹穴六角头螺栓和弹簧垫圈组合件Cross recessed hexagon bolt with indentation and single coil spring lock washer assemblies
76 GB/T 9074.13-1988
十字槽凹穴六角头螺栓、弹簧垫圈和平垫圈组合件Cross recessed hexagon bolt with indentation, single coil lock washer and plan washer assemblies
77 GB/T 9074.15-1988
六角头螺栓和弹簧垫圈组合件Hexagon head bolt and single coil spring lock washer assemblies
78 GB/T 9074.16-1988
六角头螺栓和外锯齿锁紧垫圈组合件Hexagon head bolt and serrated lock washer external teeth assemblies
79 GB/T 9074.17-1988
六角头螺栓、弹簧垫圈和平垫圈组合件Hexagon head bolt, single coil spring lock washer and plain washer assemblies
螺钉
1 GB 3098.7-2000
紧固件机械性能 自挤螺钉Mechanical properties of fasteners-Thread rolling screws
2 GB 6560-1986
十字槽盘头自攻锁紧螺钉Cross recessed pan head thread forming screws
3 GB/T 100-1986
开槽沉头木螺钉Slotted countersink head wood screws
4 GB/T 101-1986
开槽半沉头木螺钉Slotted raised countersunk head wood screws
5 GB/T 102-1986
六角头木螺钉Hexagon head wood screws
6 GB/T 10634-1989
螺钉旋具的命名与术语Screwdrivers--Designations and nomenclature
7 GB/T 10635-2003
螺钉旋具通用技术条件Screwdrivers-General technical requirements
8 GB/T 10637-1989
一字槽螺钉旋具螺杆Screwdriver blades for slotted head screws
9 GB/T 10638-1989
十字槽螺钉旋具螺杆Screwdriver blades for cross-recessed head screws
10 GB/T 10639-1989
一字槽螺钉旋具Screwdriver for slotted head screws
11 GB/T 10640-1989
十字槽螺钉旋具Screwdriver for recessed head screws
12 GB/T 10641-1989
螺旋棘轮螺钉旋具Spiral ratchet screwdriver
13 GB/T 13806.1-1992
精密机械用紧固件 十字槽自攻螺钉 刮削端
14 GB/T 13806.2-1992
精密机械用紧固件 十字槽自攻螺钉 刮削端
Fasteners for fine mechanics cross recessed tapping screws-Scrape point
15 GB/T 14210-1993
墙板自攻螺钉
16 GB/T 15049.7-1996
CAD 标准件图形文件 几何图形和特性规范 螺钉CAD standard parts file--Specification of geometry and parameters--Screws
17 GB/T 15856.1-2002
十字槽盘头自钻自攻螺钉Cross recessed pan head drillig screws with tappiing screw thread
18 GB/T 15856.2-2002
十字槽沉头自钻自攻螺钉Cross recessed countersunk head drilling screws with tapping screw thread
19 GB/T 15856.3-2002
十字槽半沉头自钻自攻螺钉Cross recessed raised countersunk head drilling screws with tapping screw thread
20 GB/T 15856.4-2002
六角法兰面自钻自攻螺钉Hexagon flange head drilling screws with tapping screw thread
21 GB/T 15856.5-2002
六角凸缘自钻自攻螺钉Hexagon washer head drilling screws with tapping screw thread
22 GB/T 16824.1-1997
六角凸缘自攻螺钉Hexagon head tapping screws with collar
23 GB/T 16824.2-1997
六角法兰面自攻螺钉Hexagon flange head tapping screws
24 GB/T 16938-1997
紧固件 螺栓、螺钉、螺柱和螺母通用技术条件Fasteners--General requirements for blots,screws,studs and nuts
25 GB/T 2670.1-2004
内六角花形盘头自攻螺钉Hexalobular socket pan head tapping screws
26 GB/T 2670.2-2004
内六角花形沉头自攻螺钉Hexalobular socket countersunk head tapping screws
27 GB/T 2670.3-2004
内六角花形半沉头自攻螺钉Hexalobular socket raised countersunk(oval)head tapping screws
28 GB/T 2671.1-2004
内六角花形低圆柱头螺钉Hexalobular socket cheese(short)head screws
29 GB/T 2671.2-2004
内六角花形圆柱头螺钉Hexalobular socket head cap screws
30 GB/T 2672-2004
内六角花形盘头螺钉Hexalobular socket pan head screws
31 GB/T 2673-1986
内六角花形沉头螺钉Hexagon lobular socket countersunk head screws
32 GB/T 2674-2004
内六角花形半沉头螺钉Hexagon lobular socket raised countersunk head screws
33 GB/T 3098.10-1993
紧固件机械性能有色金属制造的螺栓、螺钉、螺柱和螺母Mechanical properties of fasteners Bolts, scrows, studs and nuts made of non-ferrous metals
34 GB/T 3098.11-2002
紧固件机械性能 自钻自攻螺钉Mechanical properties of fasteners- Drilling screws with tapping screw thread
35 GB/T 3098.1-2000
紧固件机械性能 螺栓、螺钉和螺柱Mechanical properties of fasteners made of carbon steel and alloy steel--Part 1:Bolts,screws and studs
36 GB/T 3098.13-1996
紧固件机械性能 螺栓与螺钉的扭矩试验和破坏扭矩公称直径1～10mm Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm
37 GB/T 3098.16-2000
紧固件机械性能 不锈钢紧定螺钉Mechanical properties of fasteners Set screws made of stainless-steel
38 GB/T 3098.3-2000
紧固件机械性能 紧定螺钉Mechanical properties of fasteners-Set screws
39 GB/T 3098.5-2000
紧固件机械性能 自攻螺钉Mechanical properties of fasteners-tapping screws
40 GB/T 3098.6-2000
紧固件机械性能 不锈钢螺栓、螺钉和螺柱Mechanical properties of fasteners-Bolts,screws and studs made of stainless-steel
41 GB/T 3098.7-2000
紧固件机械性能 自挤螺钉Mechanical properties of fasteners-Thread rolling screws
42 GB/T 3099-1982
螺栓、螺钉、螺母及附件名词术语Bolts,screws,nuts and accessories-Terminology and nomenclature
43 GB/T 3103.1-2002
紧固件公差 螺栓、螺钉、螺柱和螺母Tolerances for fasteners- Bolts,screws, studs and nuts
44 GB/T 3103.2-1982
紧固件公差 用于精密机械的螺栓,螺钉和螺母Tolerances for fasteners--Bolts,screws and nuts for fine mechanics
45 GB/T 3105-2002
普通螺栓和螺钉 头下圆角半径General purpose bolts and screws-Radii under the head
46 GB/T 3106-1982
螺栓,螺钉和螺柱的公称长度和普通螺栓的螺纹长度Bolts,screws and studs--Nominal lengths and thread lengths for general purpose bolts
47 GB/T 3229-2000
螺栓螺钉用装配工具 机动螺刀头的六角传动端Assembly tools for bolts and screws-Hexagon drive ends for machine-operated screwdriver bits
48 GB/T 4389-1995
螺钉与螺母的装配工具 双头呆扳手、双头梅花扳手、两用扳手头部外形的最大尺寸
Assembly tool for screws and nuts--open-end double-head engineers wrenches, double-head box wrenches and combination wrenches--Maximum outside dimensions of heads
49 GB/T 4625-1998
螺钉和螺母的装配工具术语Assembly tools for screws and nuts--Nomenclature
50 GB/T 5276-1985
紧固件 螺栓、螺钉、螺柱及螺母 尺寸代号和标注Fasteners--Bolts,screws,studs and nuts--Symbols and designations of dimensions
51 GB/T 5277-1985
紧固件 螺栓和螺钉通孔Fasteners--Clearance holes for bolts and screws
52 GB/T 5279.2-1997
沉头螺钉 第2部分: 十字槽插入深度Countersunk flat head screws--Part 2: Penetration depth of cross recesses
53 GB/T 5279-1985
沉头螺钉 头部形状和测量Countersunk head screws--Head configuration and gauging
54 GB/T 5280-2002
自攻螺钉用螺纹Tapping screws thread
55 GB/T 5281-1985
内六角圆柱头轴肩螺钉Hexagon socket head shoulder screws
56 GB/T 5282-1985
开槽盘头自攻螺钉Slotted pan head tapping screws
57 GB/T 5283-1985
开槽沉头自攻螺钉Slotted countersunk head tapping screws
58 GB/T 5284-1985
开槽半沉头自攻螺钉Slotted raised countersunk head tapping screws
59 GB/T 5285-1985
六角头自攻螺钉Hexagon head tapping screws
60 GB/T 5286-2001
螺栓、螺钉和螺母用平垫圈 总方案Plain washers for bolts,screws and nuts--General plan
61 GB/T 5358-1998
内六角花形螺钉旋具Hexagon spline screwdrivers
62 GB/T 5779.1-2000
紧固件表面缺陷 螺栓、螺钉和螺柱一般要求Fasteners-Surface discontinuities-Bolts,screws and studs for general requirements
63 GB/T 5779.3-2000
紧固件表面缺陷 螺栓、螺钉和螺柱 特殊要求Fasteners-Surface discontinuities-Bolts,screws and studs for special requirements
64 GB/T 6188-2000
螺栓和螺钉用内六角花形Hexalobular internal driving feature for bolts and screws
65 GB/T 6191-1986
内六角花形圆柱头螺钉 8.8级Hexagon lobular socket head cap screws--Property class 8.8
66 GB/T 65-2000
开槽圆柱头螺钉Slotted cheese head screws
67 GB/T 6559-1986
自攻锁紧螺钉的螺杆 粗牙普通螺纹系列Screw thread shanks for thread forming screw--Metric coarse thread series
68 GB/T 6560-1986
十字槽盘头自攻锁紧螺钉Cross recessed pan head thread forming screws
69 GB/T 6561-1986
十字槽沉头自攻锁紧螺钉Cross recessed countersunk head thread forming screws
70 GB/T 6562-1986
十字槽半沉头自攻锁紧螺钉Cross recessed raised countersunk head thread forming screws
71 GB/T 6563-1986
六角头自攻锁紧螺钉Hexagon head thread forming screws
72 GB/T 6564-1986
内六角花形圆柱头自攻锁紧螺钉Hexagon lobular socket thread forming screws
73 GB/T 67-2000
开槽盘头螺钉Slotted pan head screws
74 GB/T 68-2000
开槽沉头螺钉Slotted countersunk flat head screws(common head style)
75 GB/T 6873-1986
手表通用螺钉尺寸系列Dimension series of general screw for wrist watches
76 GB/T 69-2000
开槽半沉头螺钉Countersunk slotted raised head screws(common head style)
77 GB/T 70.1-2000
内六角圆柱头螺钉Hexagon socket head cap screws
78 GB/T 70.2-2000
内六角平圆头螺钉Hexagon socket button head screws
79 GB/T 70.3-2000
内六角沉头螺钉Hexagon socket countersunk head screws
80 GB/T 71-1985
开槽锥端紧定螺钉Slotted set screws with cone point
81 GB/T 72-1988
开槽锥端定位螺钉Slotted set screws with cone point
82 GB/T 73-1985
开槽平端紧定螺钉Slotted set screws with flat point
83 GB/T 74-1985
开槽凹端紧定螺钉Slotted set screws with cup point
84 GB/T 75-1985
开槽长圆柱端紧定螺钉Slotted set screws with dog point
85 GB/T 77-2000
内六角平端紧定螺钉Hexagon socket set screws with flat point
86 GB/T 78-2000
内六角锥端紧定螺钉Hexagon socket set screws with cone point
87 GB/T 79-2000
内六角圆柱端紧定螺钉Hexagon socket set screws with dog point
88 GB/T 80-2000
内六角凹端紧定螺钉Hexagon socket set screws with cup point
89 GB/T 818-2000
十字槽盘头螺钉Pan head screws with cross recess
90 GB/T 819.1-2000
十字槽沉头螺钉 第1部分:钢4.8级Countersunk flat head screws(common head style)with cross recess-Part 1:Steel of property class 4.8
91 GB/T 819.2-1997
十字槽沉头螺钉 第2部分: 钢8.8、不锈钢A2-70和有色金属CU2或CU3
Cross recessed countersunk flat head screws (common head style)--Grade A--Part 2: Steel of property class 8.8, stainless and non-ferrous metals
92 GB/T 820-2000
十字槽半沉头螺钉Countersunk raised head screws (common head style)with cross recess
93 GB/T 821-1988
方头倒角端紧定螺钉Square set screws with chamfered end
94 GB/T 822-2000
十字槽圆柱头螺钉Cheese head screws with cross recess
95 GB/T 823-1988
十字槽小盘头螺钉Cross recessed small pan head screws
96 GB/T 825-1988
吊环螺钉Eyebolts
97 GB/T 828-1988
开槽盘头定位螺钉Slotted pan head set setscrews with dog point
98 GB/T 829-1988
开槽圆柱端定位螺钉Slotted set screws with dog point
99 GB/T 830-1988
开槽圆柱头轴位螺钉Slotted cheese head screws with shoulder
100 GB/T 831-1988
开槽无头轴位螺钉Slotted shoulder screws
101 GB/T 83-1988
方头长圆柱球面端紧定螺钉Square set screws with long dog point and rounded end
102 GB/T 832-1988
开槽带孔球面圆柱头螺钉Slotted capstan screws
103 GB/T 833-1988
开槽大圆柱头螺钉Slotted large cheese head screws
104 GB/T 834-1988
滚花高头螺钉Knurled thumb screws
105 GB/T 835-1988
滚花平头螺钉Knurled screws
106 GB/T 836-1988
滚花小头螺钉Knurled screws with small head
107 GB/T 837-1988
开槽盘头不脱出螺钉Slotted pan head screws with waisted shank
108 GB/T 838-1988
六角头不脱出螺钉Hexagon screws with waisted shank
109 GB/T 839-1988
滚花头不脱出螺钉Knurled thumb screws with waisted shank
110 GB/T 840-1988
塑料滚花头螺钉Plastic diamond knurlhead screws
111 GB/T 84-1988
方头凹端紧定螺钉Square set screws with cup point
112 GB/T 845-1985
十字槽盘头自攻螺钉Cross recessed pan head tapping screws
113 GB/T 846-1985
十字槽沉头自攻螺钉Cross recessed countersunk head tapping screws
114 GB/T 847-1985
十字槽半沉头自攻螺钉Cross recessed raised countersunk head tapping screws
115 GB/T 85-1988
方头长圆柱端紧定螺钉Square set screws with long dog point
116 GB/T 86-1988
方头短圆柱锥端紧定螺钉Square set screws with short dog point and cone end
117 GB/T 884-1986
螺钉锁紧挡圈Lock ring with screw
118 GB/T 885-1986
带锁圈的螺钉锁紧挡圈Lock rings with screw and circlip
119 GB/T 891-1986
螺钉紧固轴端挡圈Lock rings at the end of shaft with screw
120 GB/T 9074.10-1988
十字槽半沉头螺钉和锥形锁紧垫圈组合件Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies
121 GB/T 9074.1-2002
螺栓或螺钉和平垫圈组合件Bolt or screw and washer assemblies with plain washers
122 GB/T 9074.18-2002
自攻螺钉和平垫圈组合件Tapping screw and washer assemblies with plain washers
123 GB/T 9074.20-2004
十字槽凹穴六角头自攻螺钉和平垫圈组合件Cross recessed hexagon head tapping screw with indentation and washer assemblies with plain washers
124 GB/T 9074.2-1988
十字槽盘头螺钉和外锯齿锁紧垫圈组合件Cross recessed pan head screw and serrated lock washer external teeth assemblies
125 GB/T 9074.3-1988
十字槽盘头螺钉和弹簧垫圈组合件Cross recessed pan head screw and single coil spring lock washer assemblies
126 GB/T 9074.4-1988
十字槽盘头螺钉、弹簧垫圈和平垫圈组合件Cross recessed pan head screw,single coil spring lock washer and plain washer assemblies
127 GB/T 9074.5-2004
十字槽小盘头螺钉和平垫圈组合件Cross recessed small pan head screw and washer assemblies with plain washers
128 GB/T 9074.7-1988
十字槽小盘头螺钉和弹簧垫圈组合件Cross recessed small pan head screw and single coil spring lock washer assemblies
129 GB/T 9074.8-1988
十字槽小盘头螺钉、弹簧垫圈及平垫圈组合件Cross recessed small pan head screw,single coil spring lock washer and plain washer assemblies
130 GB/T 9074.9-1988
十字槽沉头螺钉和锥形锁紧垫圈组合件Cross recessed countersunk head screw and countersunk external toothed lock washer assemblies
131 GB/T 922-1986
木螺钉技术条件Specifications for wood screws
132 GB/T 944.1-1985
螺钉用十字槽Cross recesses for screws
133 GB/T 945-1976
十字槽球面中柱头螺钉Screws,cross recessed,thin raised cheese head
134 GB/T 9456-1988
十字槽凹穴六角自攻螺钉Cross recessed hexagon head tapping screws with indentation
135 GB/T 946-1988
开槽球面圆柱头轴位螺钉Slotted raised cheese head with shoulder
136 GB/T 947-1988
开槽球面大圆柱头螺钉Slotted large raised cheese head screws
137 GB/T 948-1988
开槽沉头不脱出螺钉Slotted countersunk head screws with waisted shank
138 GB/T 949-1988
开槽半沉头不脱出螺钉Slotted raised countersunk head screws with waisted shank
139 GB/T 950-1986
十字槽圆头木螺钉Cross recessed round head wood screws
140 GB/T 951-1986
十字槽沉头木螺钉Cross recessed countersunk head wood screws
141 GB/T 952-1986
十字槽半沉头木螺钉Cross recessed raised countersunk head wood screws
142 GB/T 97.4-2002
平垫圈 用于螺钉和垫圈组合件Plain washers for screw and washer assemblies
143 GB/T 97.5-2002
平垫圈 用于自攻螺钉和垫圈组合件Plain washers for tapping screw and washer assemblies
144 GB/T 973-1976
十字槽扁圆头螺钉Screws,cross recessed,oval head
145 GB/T 974-1976
十字槽120°半沉头螺钉Screws,cross recessed,120 degree raised countersunk head
146 GB/T 99-1986
开槽圆头木螺钉Slotted round head wood screws
螺母
1 GB/T 1007-1976
小六角较扁螺母Small hexagon medium thin nuts
2 GB/T 1009-1978
螺母专用技术条件
3 GB/T 1229-1991
钢结构用高强度大六角螺母High strength large hexagon nuts for steel structures
4 GB/T 1231-1991
钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术条件Specifications of high strength bolts with large hexagon head, large hexagon nuts,plain washers for steel structures
5 GB/T 12868-1991
机床夹具零件及部件 T型槽用螺母The parts and units of jigs and fixtures--T-slot nut
6 GB/T 1337-1988
六角自锁螺母Self-locking nuts,hexagon
7 GB/T 1338-1988
小六角扁自锁螺母Self-locking nuts,reduced hexagon oblate
8 GB/T 1339-1988
小六角自锁螺母Self-locking nuts,reduced hexagon
9 GB/T 1340-1988
成组游动托板自锁螺母支架Supports for self-locking nuts,floating,Gang channel
10 GB/T 13680-1992
焊接方螺母Square weld nuts
11 GB/T 13681-1992
焊接六角螺母Hexagon weld nuts
12 GB/T 13807.3-1992
腰状杆螺柱连接副 螺母 受力套管Connections with waisted stud. Nuts,extension sleeves
13 GB/T 15049.5-1996
CAD 标准件图形文件 几何图形和特性规范 螺母CAD standard parts file--Specification of geometry and parameters--Nuts
14 GB/T 152.4-1988
紧固件 六角头螺栓和六角螺母用沉孔Fasteners--Counterbores for hexagon bolts and nuts
15 GB/T 16938-1997
紧固件 螺栓、螺钉、螺柱和螺母通用技术条件Fasteners--General requirements for blots,screws,studs and nuts
16 GB/T 17880.1-1999
平头铆螺母Flat head riveted nuts
17 GB/T 17880.2-1999
沉头铆螺母Countersunk head riveted nuts
18 GB/T 17880.3-1999
小沉头铆螺母Small countersunk head riveted nuts
19 GB/T 17880.4-1999
120°小沉头铆螺母120°Small countersunk head riveted nuts
20 GB/T 17880.5-1999
平头六角铆螺母Flat head hexagon riveted nuts
21 GB/T 17880.6-1999
铆螺母技术条件Specifications for riveted nuts
22 GB/T 18195-2000
精密机械用六角螺母Hexagon nuts for fine mechanics
23 GB/T 18230.3-2000
栓接结构用大六角螺母 B级 8和10级Hexagon nuts for high-strength structural bolting with large width across flats-Product grade B-Property classes 8 and 10
24 GB/T 18230.4-2000
栓接结构用1型大六角螺母 B级 10级Hexagon nuts for structural bolting with large width across flats,style 1-Product grade B-Property class 10
25 GB/T 18230.6-2000
栓接结构用1型六角螺母 热浸镀锌(加大攻丝尺寸) A和B级 5、6和8级
Hexagon nuts for structural bolting,style 1,hot-dip galvanized(oversize tapped)-Product grades A and B-Property classes 5,6 and 8
26 GB/T 18230.7-2000
栓接结构用2型六角螺母 热浸镀锌(加大攻丝尺寸) A级 9级Hexagon nuts for structural bolting-style 2,hot-dip galvanized(oversize tapped)-Product grade A-Property class 9
27 GB/T 18677-2002
植物保护机械 风送喷雾机 喷头旋接螺母的尺寸Equipment for crop protection--Air-assisted sprayers--Dimensions of nozzles swivel nuts
28 GB/T 3098.10-1993
紧固件机械性能有色金属制造的螺栓、螺钉、螺柱和螺母Mechanical properties of fasteners Bolts, scrows, studs and nuts made of non-ferrous metals
29 GB/T 3098.12-1996
紧固件机械性能 螺母锥形保证载荷试验Mechanical properties of fasteners--Cone proof load test on nuts
30 GB/T 3098.14-2000
紧固件机械性能 螺母扩孔试验Mechanical properties of fasteners-Widening test on nuts
31 GB/T 3098.15-2000
紧固件机械性能 不锈钢螺母Mechanical properties of fasteners Nuts made of stainless-steel
32 GB/T 3098.20-2004
紧固件机械性能 蝶形螺母 保证扭矩Mechanical properties of fasteners-Wing nuts with specified proof torque
33 GB/T 3098.2-2000
紧固件机械性能 螺母 粗牙螺纹Mechanical properties of fasteners--Part 2:Nuts with specified proof load values--Coarse thread
34 GB/T 3098.4-2000
紧固件机械性能 螺母 细牙螺纹Mechanical properties of fasteners-Nuts-Fine pitch thread
35 GB/T 3098.9-2002
紧固件机械性能 有效力矩型钢六角锁紧螺母Mechanical properties of fasteners-Prevailing torque type steel hexagon nuts
36 GB/T 3099-1982
螺栓、螺钉、螺母及附件名词术语Bolts,screws,nuts and accessories-Terminology and nomenclature
37 GB/T 3103.1-2002
紧固件公差 螺栓、螺钉、螺柱和螺母Tolerances for fasteners- Bolts,screws, studs and nuts
38 GB/T 3103.2-1982
紧固件公差 用于精密机械的螺栓,螺钉和螺母Tolerances for fasteners--Bolts,screws and nuts for fine mechanics
39 GB/T 3227-2000
螺栓螺母用装配工具 机动套筒工具的传动四方Assembly tools for screws and nuts-Driving squares for power socket tools
40 GB/T 3228-2000
螺栓螺母用装配工具 冲击式机动四方传动套筒的尺寸Assembly tools for screws and nuts-Machine-operated square drive sockets ("impact")-Dimensions
41 GB/T 3759-1983
卡套式管接头用螺母Bite type tube fittings--Nuts
42 GB/T 3760-1983
卡套式管接头用对接螺母Bite type tube fittings--Nuts for butt joints
43 GB/T 3763-1983
卡套式管接头用六角薄螺母Bite type tube fittings--Hexagon thin nuts
44 GB/T 39-1988
方螺母 C级Square nuts--Product grade C
45 GB/T 41-2000
六角螺母 C级Hexagon nuts-Product grade C
46 GB/T 4389-1995
螺钉与螺母的装配工具 双头呆扳手、双头梅花扳手、两用扳手头部外形的最大尺寸
Assembly tool for screws and nuts--open-end double-head engineers wrenches, double-head box wrenches and combination wrenches--Maximum outside dimensions of heads
47 GB/T 4625-1998
螺钉和螺母的装配工具术语Assembly tools for screws and nuts--Nomenclature
48 GB/T 5276-1985
紧固件 螺栓、螺钉、螺柱及螺母 尺寸代号和标注Fasteners--Bolts,screws,studs and nuts--Symbols and designations of dimensions
49 GB/T 5286-2001
螺栓、螺钉和螺母用平垫圈 总方案Plain washers for bolts,screws and nuts--General plan
50 GB/T 56-1988
六角厚螺母Hexagon thick nuts
51 GB/T 5647-1985
扩口式A型管接头螺母Flared type tube fittings--Style A nut
52 GB/T 5648-1985
扩口式B型管接头螺母Flared type tube fittings--Style B nut
53 GB/T 5649-1985
扩口式管接头锁紧螺母Flared type tube fittings--Locknut
54 GB/T 5652-1985
扩口式管接头锁紧螺母垫圈Flared type tube fittings--Back-up washer
55 GB/T 5779.2-2000
紧固件表面缺陷 螺母Fasteners-Surface discontinuities-Nuts
56 GB/T 6170-2000
1型六角螺母Hexagon nuts,style 1
57 GB/T 6171-2000
1型六角螺母 细牙Hexagon nuts,style 1,with fine pitch thread
58 GB/T 6172.1-2000
六角薄螺母Hexagon thin nuts(chamfered)
59 GB/T 6172.2-2000
非金属嵌件六角锁紧薄螺母Prevailing torque type hexagon thin nuts(with non-metallic insert)
60 GB/T 6173-2000
六角薄螺母 细牙Hexagon thin nuts (chamfered) with fine pitch thread
61 GB/T 6174-2000
六角薄螺母 无倒角Hexagon thin nuts (unchamfered)
62 GB/T 6175-2000
2型六角螺母Hexagon nuts,style 2
63 GB/T 6176-2000
2型六角螺母 细牙Hexagon nuts,style 2,with fine pitch thread
64 GB/T 6177.1-2000
六角法兰面螺母Hexagon nuts with flange
65 GB/T 6177.2-2000
六角法兰面螺母 细牙Hexagon nuts with flange-Fine pitch thread
66 GB/T 6178-1986
1型六角开槽螺母A和B级Hexagon slotted and castle nuts,style 1--Product grades A and B
67 GB/T 6179-1986
1型六角开槽螺母 C级Hexagon slotted nuts,style 1--Product grade C
68 GB/T 6180-1986
2型六角开槽螺母 A和B级Hexagon slotted and castle nuts,style 2--Product grades A and B
69 GB/T 6181-1986
六角开槽薄螺母 A和B级Hexagon thin slotted nuts--Product grades A and B
70 GB/T 6182-2000
2型非金属嵌件六角锁紧螺母Prevailing torque type hexagon nuts(with non-metallic insert),style 2
71 GB/T 6183.1-2000
非金属嵌件六角法兰面锁紧螺母Prevailing torque type hexagon nuts with flange(with non-metallic insert)
72 GB/T 6183.2-2000
非金属嵌件六角法兰面锁紧螺母 细牙Prevailing torque type hexagon nuts with flange(with non-metallic insert) with fine pitch thread
73 GB/T 6184-2000
1型全金属六角锁紧螺母Prevailing torque type all-metal hexagon nuts,style 1
74 GB/T 6185.1-2000
2型全金属六角锁紧螺母Prevailing torque type all-metal hexagon nuts,style 2
75 GB/T 6185.2-2000
2型全金属六角锁紧螺母 细牙Prevailing torque type all-metal hexagon nuts,style 2,with fine pitch thread
76 GB/T 6186-2000
2型全金属六角锁紧螺母9级Prevailing torque type all-metal hexagon nuts,style 2--Property class 9
77 GB/T 6187.1-2000
全金属六角法兰面锁紧螺母Prevailing torque type all-metal hexagon nuts with flange
78 GB/T 6187.2-2000
全金属六角法兰面锁紧螺母 细牙Prevailing torque type all-metal hexagon nuts with flange with fine pitch thread
79 GB/T 62.1-2004
蝶形螺母 圆翼Wing nuts-Round wing
80 GB/T 62.2-2004
蝶形螺母 方翼Wing nuts-Square wing
81 GB/T 62.3-2004
蝶形螺母 冲压Wing nuts-Pressing wing
82 GB/T 62.4-2004
蝶形螺母 压铸Wing nuts-Die-casting wing
83 GB/T 63-1988
环形螺母Lifting nuts
84 GB/T 802-1988
组合式盖形螺母Acorn nuts
85 GB/T 804-1988
球面六角螺母Hexagon nuts with raised face
86 GB/T 805-1988
扣紧螺母Tight nuts
87 GB/T 806-1988
滚花高螺母Knurled nut with collar
88 GB/T 807-1988
滚花薄螺母Knurled nuts
89 GB/T 808-1988
小六角特扁细牙螺母Small hexagon thin nuts--Fine pitch thread
90 GB/T 809-1988
嵌装圆螺母Insert round nuts
91 GB/T 810-1988
小圆螺母Small round nuts
92 GB/T 812-1988
圆螺母Round nuts
93 GB/T 815-1988
端面带孔圆螺母Round nuts with drilled holes in one face
94 GB/T 816-1988
侧面带孔圆螺母Round nuts with set pin holes in side
95 GB/T 817-1988
带槽圆螺母Slotted round nuts
96 GB/T 858-1988
圆螺母用止动垫圈Tab washers for round nut
97 GB/T 889.1-2000
1型非金属嵌件六角锁紧螺母Prevailing torque type hexagon nuts(with non-metallic insert),style 1
98 GB/T 889.2-2000
1型非金属嵌件六角锁紧螺母 细牙Prevailing torque type hexagon nuts(with non-metallic insert),Style 1,with fine pitch thread
99 GB/T 923-1988
盖形螺母Acorn nuts
100 GB/T 925-1988
轻型六角自锁螺母Self-locking nuts,hexagon light
101 GB/T 927-1988
球面六角自锁螺母Self-locking nuts,hexagonal sphere
102 GB/T 929-1988
单耳托板自锁螺母Self-locking nuts,singlelug,anchor
103 GB/T 930-1988
双耳托板自锁螺母Self-locking nuts,twolug,anchor
104 GB/T 931-1988
角形托板自锁螺母Self-locking nuts,angle,anchor
105 GB/T 932-1988
气密单耳托板自锁螺母Self-locking nuts,single lug,sealing
106 GB/T 933-1988
气密双耳托板自锁螺母Self-locking nuts,two lug, sealing
107 GB/T 937-1988
成组游动托板自锁螺母Self-locking nuts,floating,Gang channel
108 GB/T 938-1988
自锁螺母Self-locking nuts
109 GB/T 939-1988
单耳托板自锁螺母保护罩Boots for self-locking nuts, singlelug anchor
110 GB/T 940-1988
双耳托板自锁螺母保护罩Boots for self-locking nuts,two lug
111 GB/T 941-1988
角形托板自锁螺母保护罩Boots for self-locking nuts,angle
112 GB/T 943-1988
自锁螺母技术条件Procurement specification for self-locking nuts
113 GB/T 9457-1988
1型六角开槽螺母 细牙 A和B级Hexagon slotted and castle nuts,style 1--Fine pitch thread--Product grades A and B
114 GB/T 9458-1988
2型六角开槽螺母 细牙 A和B级Hexagon slotted and castle nuts,style 2--Fine pitch thread--Product grades A and B
115 GB/T 9459-1988
六角开槽薄螺母 细牙 A和B级Hexagon thin slotted nuts--Fine pitch thread--Product grades A and B
116 GB/T 961-1988
单耳托板自锁螺母垫片Spacers for self-locking nuts,single lug
117 GB/T 962-1988
双耳托板自锁螺母垫片Spacers for self-locking nuts,twolug
118 GB/T 963-1988
角形托板自锁螺母垫片Spacers for self-locking nuts,angle
119 GB/T 967-1994
螺母丝锥Nut taps
垫圈
1 GB 583-1965
船用法兰软垫圈Marine pipe flanges--Soft gasket
2 GB/T 1021-1976
角形垂直单耳止动垫圈Lock washers with angular upturn tab perpendicular to the lug
3 GB/T 1022-1976
角形单耳止动垫圈Lock washers with angular upturn tab in line to the lug
4 GB/T 1023-1976
角形垂直外舌止动垫圈Lock washers with angular upturn tab perpendicular to the external tab
5 GB/T 1024-1976
角形外舌止动垫圈Lock washers with angular upturn tab in line to the external tab
6 GB/T 1030-1988
内球面垫圈Inner sphere washers
7 GB/T 10446-1989
滑动轴承 整圆止推垫圈 尺寸和公差Plain bearings--Ring type thrust washers made from strip--Dimensions and tolerances
8 GB/T 10447-1989
滑动轴承 半圆止推垫圈 要素和公差Plain bearings--Pressed bimetallic half thrust washers--Features and tolerances
9 GB/T 1230-1991
钢结构用高强度垫圈High strength plain washers for steel structures
10 GB/T 1231-1991
钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术条件
Specifications of high strength bolts with large hexagon head, large hexagon nuts,plain washers for steel structures
11 GB/T 12385-1990
管法兰用垫片密封性能试验方法Test method for sealing characteristics of gaskets for pipe flanges
12 GB/T 12871-1991
机床夹具零件及部件 快换垫圈The parts and units of jigs and fixtures Smooth face clamp plate
13 GB/T 14180-1993
缠绕式垫片试验方法
14 GB/T 15049.9-1996
CAD 标准件图形文件 几何图形和特性规范 垫圈CAD standard parts file--Specification of geometry and parameters--Washers
15 GB/T 15601-1995
管法兰用金属包覆垫片Metallic envelope gaskets for pipe flanges
16 GB/T 18230.5-2000
栓接结构用平垫圈 淬火并回火Plain washers for high-strength structural bolting hardened and tempered
17 GB/T 2502-1989
船用法兰软垫圈(四进位)Marine pipe flanges-soft gasket
18 GB/T 2861.15-1990
冲模导向装置 垫圈Guide unit for press tools--Washer
19 GB/T 3103.3-2000
紧固件公差 平垫圈Tolerances for fasteners-Plain washers
20 GB/T 3762-1983
卡套式管接头用尖角密封垫圈Bite type tube fittings--Tipping washer
21 GB/T 4605-2003
滚动轴承 推力滚针和保持架组件及推力垫圈Rolling bearings-Thrust needle roller and cage assemblies,thrust washers
22 GB/T 4678.13-2003
压铸模零件 第13部分:推板垫圈Die-casting die components-Part 13: Ejector plate washer
23 GB/T 5222-1985
弹簧垫圈用梯形钢丝Trapezed steel wire for spring washer
24 GB/T 5286-2001
螺栓、螺钉和螺母用平垫圈 总方案Plain washers for bolts,screws and nuts--General plan
25 GB/T 5287-2002
特大垫圈 C级Plain washers-Extra large series-Product grade C
26 GB/T 5652-1985
扩口式管接头锁紧螺母垫圈Flared type tube fittings--Back-up washer
27 GB/T 583-1965
船用法兰软垫圈Marine pipe flanges--Soft gasket
28 GB/T 7244-1987
重型弹簧垫圈Single coil spring lock washers, heavy type
29 GB/T 7245-1987
鞍形弹簧垫圈Curved single coil spring lock washers
30 GB/T 7246-1987
波形弹簧垫圈Wave single coil spring lock washers
31 GB/T 848-2002
小垫圈 A级Plain washers-Small series-Product grade A
32 GB/T 849-1988
球面垫圈Washers with ball face
33 GB/T 850-1988
锥面垫圈Washers with cone face
34 GB/T 851-1988
开口垫圈Washers with split
35 GB/T 852-1988
工字钢用方斜垫圈Square taper washers for I section
36 GB/T 853-1988
槽钢用方斜垫圈Square taper washers for slot section
37 GB/T 854-1988
单耳止动垫圈Tab washers with long tab
38 GB/T 855-1988
双耳止动垫圈Tab washers with long tab and wing
39 GB/T 856-1988
外舌止动垫圈External tab washers
40 GB/T 858-1988
圆螺母用止动垫圈Tab washers for round nut
41 GB/T 859-1987
轻型弹簧垫圈Single coil spring lock washers,light type
42 GB/T 860-1987
鞍形弹性垫圈Curved spring washers
43 GB/T 861.1-1987
内齿锁紧垫圈Lock washers internal teeth
44 GB/T 861.2-1987
内锯齿锁紧垫圈Serrated lock washers interal teeth
45 GB/T 862.1-1987
外齿锁紧垫圈Lock washers external teeth
46 GB/T 862.2-1987
外锯齿锁紧垫圈Serrated lock washers exteral teeth
47 GB/T 9074.10-1988
十字槽半沉头螺钉和锥形锁紧垫圈组合件Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies
48 GB/T 9074.11-1988
十字槽凹穴六角头螺栓和平垫圈组合件Cross recessed hexagon bolt with indention and plain washer assemblies
49 GB/T 9074.1-2002
螺栓或螺钉和平垫圈组合件Bolt or screw and washer assemblies with plain washers
50 GB/T 9074.12-1988
十字槽凹穴六角头螺栓和弹簧垫圈组合件Cross recessed hexagon bolt with indentation and single coil spring lock washer assemblies
51 GB/T 9074.13-1988
十字槽凹穴六角头螺栓、弹簧垫圈和平垫圈组合件Cross recessed hexagon bolt with indentation, single coil lock washer and plan washer assemblies
52 GB/T 9074.15-1988
六角头螺栓和弹簧垫圈组合件Hexagon head bolt and single coil spring lock washer assemblies
53 GB/T 9074.16-1988
六角头螺栓和外锯齿锁紧垫圈组合件Hexagon head bolt and serrated lock washer external teeth assemblies
54 GB/T 9074.17-1988
六角头螺栓、弹簧垫圈和平垫圈组合件Hexagon head bolt, single coil spring lock washer and plain washer assemblies
55 GB/T 9074.18-2002
自攻螺钉和平垫圈组合件Tapping screw and washer assemblies with plain washers
56 GB/T 9074.20-2004
十字槽凹穴六角头自攻螺钉和平垫圈组合件Cross recessed hexagon head tapping screw with indentation and washer assemblies with plain washers
57 GB/T 9074.2-1988
十字槽盘头螺钉和外锯齿锁紧垫圈组合件Cross recessed pan head screw and serrated lock washer external teeth assemblies
58 GB/T 9074.26-1988
组合件用弹簧垫圈Single coil spring lock washer for assembly
59 GB/T 9074.27-1988
组合件用外锯齿锁紧垫圈Serrated lock washer external teeth for assembly
60 GB/T 9074.28-1988
组合件用锥形锁紧垫圈Countersunk external toothed lock washer for assembly
61 GB/T 9074.3-1988
十字槽盘头螺钉和弹簧垫圈组合件Cross recessed pan head screw and single coil spring lock washer assemblies
62 GB/T 9074.4-1988
十字槽盘头螺钉、弹簧垫圈和平垫圈组合件Cross recessed pan head screw,single coil spring lock washer and plain washer assemblies
63 GB/T 9074.5-2004
十字槽小盘头螺钉和平垫圈组合件Cross recessed small pan head screw and washer assemblies with plain washers
64 GB/T 9074.7-1988
十字槽小盘头螺钉和弹簧垫圈组合件Cross recessed small pan head screw and single coil spring lock washer assemblies
65 GB/T 9074.8-1988
十字槽小盘头螺钉、弹簧垫圈及平垫圈组合件Cross recessed small pan head screw,single coil spring lock washer and plain washer assemblies
66 GB/T 9074.9-1988
十字槽沉头螺钉和锥形锁紧垫圈组合件Cross recessed countersunk head screw and countersunk external toothed lock washer assemblies
67 GB/T 93-1987
标准型弹簧垫圈Single coil spring lock washers,normal type
68 GB/T 94.1-1987
弹性垫圈技术条件 弹簧垫圈Specifications for spring washers--Single coil spring lock washers
69 GB/T 94.2-1987
弹性垫圈技术条件 齿形、锯齿锁紧垫圈Specifications for spring washers--Toothed lock and serrated lock washers
70 GB/T 94.3-1987
弹性垫圈技术条件 鞍形、波形弹性垫圈Specifications for spring washers--Curved and wave spring washers
71 GB/T 95-2002
平垫圈 C级Plain washers-Product grade C
72 GB/T 955-1987
波形弹性垫圈Wave spring washers
73 GB/T 956.1-1987
锥形锁紧垫圈Countersunk external toothed lock washers
74 GB/T 956.2-1987
锥形锯齿锁紧垫圈Countersunk serrated external toothed lock washers
75 GB/T 96.1-2002
大垫圈 A级Plain washers-Large series-Product grade A
76 GB/T 96.2-2002
大垫圈 C级Plain washers-Large series-Product grade C
77 GB/T 97.1-2002
平垫圈 A级Plain washers-Product grade A
78 GB/T 97.2-2002
平垫圈 倒角型 A级Plain washers,chamfered-Product grade A
79 GB/T 97.3-2000
销轴用平垫圈Plain washers for clevis pins
80 GB/T 97.4-2002
平垫圈 用于螺钉和垫圈组合件Plain washers for screw and washer assemblies
81 GB/T 97.5-2002
平垫圈 用于自攻螺钉和垫圈组合件Plain washers for tapping screw and washer assemblies
82 GB/T 98-1988
止动垫圈技术条件Specification for tab washer
链条
1 GB/T 13795-1992
工业链条用冷轧钢带
2 GB/T 13796-1992
工业链条用冷拉钢
3 GB/T 14212-2003
摩托车链条 技术条件和试验方法Motor cycle chains-Characteristics and test methods
4 GB/T 15390-1994
工程用钢制焊接弯板链和链轮Welded steel type cranked link mill chains and chain wheels
5 GB/T 17482-1998
输送用模锻易拆链Drop-forged rivetless chains for conveyors
6 GB/T 18342-2001
链条炉排锅炉用煤技术条件Specifications of coal for chain and travelling grate stoker boiler
7 GB/T 18669-2002
船用锚链圆钢Steel bars for ship anchor chain
8 GB/T 3579-2002
自行车链条 技术条件和试验方法Cycle chains--Characteristics and test methods
9 GB/T 9785-1988
链条、链轮术语Terminology of chains and chainwheels
花键
1 GB/T 10081-1988
矩形内花键 长度系列Straight-sided internal spline--Length series
2 GB/T 10081-2005
矩形内花键长度系列
3 GB/T 10919-1989
矩形花键量规Gauges for straight-sided splines
4 GB/T 10930-2004
花键轴磨床 参数Spline shaft grinding machines—Parameters
5 GB/T 10952-1989
矩形花键滚刀Hobs for parallel side splines
6 GB/T 10952-2005
矩形花键滚刀
7 GB/T 1144-2001
矩形花键尺寸、公差和检验Straight-sided spline-Dimensions,tolerances and verification
8 GB/T 15758-1995
花键基本术语Basic terminology of spline
9 GB/T 17855-1999
花键承载能力计算方法Calculation of load capacity of spline
10 GB/T 18842-2002
圆锥直齿渐开线花键Taper cylindrical involute splines
11 GB/T 3478.1-1995
圆柱直齿渐开线花键 模数 基本齿廓 公差Straight cylindrical involute splines--Modules, basic rack profiles and tolerances
12 GB/T 3478.2-1995
圆柱直齿渐开线花键 30°压力角 尺寸表Straight cylindrical involute splines--30°pressure angle dimensions tables
13 GB/T 3478.3-1995
圆柱直齿渐开线花键 37.5°压力角 尺寸表Straight cylindrical involute splines--37.5°pressure angle dimensions tables
14 GB/T 3478.4-1995
圆柱直齿渐开线花键 45°压力角 尺寸表Straight cylindrical involute splines--45°pressure angle dimensions tables
15 GB/T 3478.5-1995
圆柱直齿渐开线花键 检验方法Straight cylindrical involute splines inspection methods
16 GB/T 3478.6-1995
圆柱直齿渐开线花键 30°压力角 M值和W值Straight cylindrical involute splines 30°pressure angle-- M and W values
17 GB/T 3478.7-1995
圆柱直齿渐开线花键 37.5°压力角 M值和W值Straight cylindrical involute splines 37.5°pressure angle--M and W values
18 GB/T 3478.9-1995
圆柱直齿渐开线花键 量棒Straight cylindrical involute splines Measuring pin
19 GB/T 4459.3-2000
机械制图 花键表示法Mechanical drawings--Representation of splines
20 GB/T 5102-2004
渐开线花键拉刀 技术条件Broaches for involute spline technical specifications
21 GB/T 5103-2004
渐开线花键滚刀 通用技术条件The general technical specifications for involute splines hobs
22 GB/T 5104-2004
30°压力角渐开线花键滚刀基本型式和尺寸The basic types and dimensions of hobs for 30°pressure angle involute splines
23 GB/T 5105-2004
45°压力角渐开线花键滚刀基本型式和尺寸The basic types and dimensions of hobs for 45°pressure angle involute splines
24 GB/T 5106-1985
圆柱直齿渐开线花键量规Gauges for straight cylindrical involute splines
25 GB/T 9167-2003
花键轴铣床 精度检验Spline hobbing machines-Testing of the accuracy
轴承
1 GB/T 10445-1989
滑动轴承 整体轴套的轴径Plain bearings--Shaft diameters for unsplit bushes
2 GB/T 10446-1989
滑动轴承 整圆止推垫圈 尺寸和公差Plain bearings--Ring type thrust washers made from strip--Dimensions and tolerances
3 GB/T 10447-1989
滑动轴承 半圆止推垫圈 要素和公差Plain bearings--Pressed bimetallic half thrust washers--Features and tolerances
4 GB/T 11261-1989
高碳铬轴承钢化学分析法 脉冲加热惰气熔融 红外线吸收法测定氧量
Methods for chemical analysis of high carbon chromium bearing steel--The pulse heating inert gas fusion-infra-red absorption method for the determination of oxygen content
5 GB/T 1174-1992
铸造轴承合金cast bearing metals
6 GB/T 12613.1-2002
滑动轴承 卷制轴套 第1部分:尺寸Plain bearings-Wrapped bushes-Part 1:Dimensions
7 GB/T 12613.2-2002
滑动轴承 卷制轴套 第2部分:外径和内径的检测数据Plain bearings-Wrapped bushes-Part 2:Test data for outside and inside diameter
8 GB/T 12613.3-2002
滑动轴承 卷制轴套 第3部分:润滑油孔、润滑油槽和润滑油穴Plain bearings-Wrapped bushes-Part 3:Lubrication holes,lubrication grooves and lubrication indentations
9 GB/T 12613.4-2002
滑动轴承 卷制轴承 第4部分:材料Plain bearings-Wrapped bushes-Part 4:Materials
10 GB/T 12613-1990
滑动轴承 卷制轴套Plain bearings--Wrapped bushes
11 GB/T 12764-1991
滚动轴承 冲压外圈滚针轴承 外形尺寸方案Rolling bearings--Needle roller bearings,drawn cup,without inner ring--Boundary dimension plan
12 GB/T 12765-1991
关节轴承 安装尺寸Spherical plain bearings, joint type Abutment and fillet dimensions
13 GB/T 12948-1991
滑动轴承 双金属结合强度破坏性试验方法Plain bearings--Metallic multilayer plain bearings--Destructive testing of bond for bearing metals
14 GB/T 12949-1991
滑动轴承 覆有减摩塑料层的双金属轴套Plain bearings--Bimetallic bushes with plastic overlay
15 GB/T 13345-1992
轧机油膜轴承通用技术条件
16 GB/T 14036-1993
液压缸活塞杆端带关节轴承耳环安装尺寸
17 GB/T 14364-1993
船舶轴系滑动式中间轴承
18 GB/T 14910-1994
滑动轴承 厚壁多层轴承衬背技术要求Plain bearings. Requirements on backings for thick-walled multilayer bearings
19 GB/T 15049.11-1997
CAD标准件图形文件 几何图形和特性规范 滚动轴承CAD standard parts file--Specification of geometry and parameters--Rolling bearings
20 GB/T 16643-1996
滚动轴承 滚针和推力圆柱滚子组合轴承 外形尺寸Rolling bearings--Combined needle roller thrust roller bearings--Boundary dimensions
21 GB/T 16748-1997
滑动轴承 金属轴承材料的压缩试验Plain bearings--Compression testing of metallic bearing materials
22 GB/T 16925-1997
混凝土及其制品耐磨性试验方法 (滚珠轴承法)Test method for abrasion resistance of concrete and its products (Ball bearing method)
23 GB/T 16940-1997
直线运动支承 直线运动球轴承 外形尺寸和公差Linear motion bearings--Linear motion ball bearings--Boundary dimensions and tolerances
24 GB/T 18254-2002
高碳铬轴承钢High-carbon chromium bearing steel
25 GB/T 18323-2001
滑动轴承 烧结轴套的尺寸和公差Plain bearings--Sintered bushes--Dimensions and tolerances
26 GB/T 18324-2001
滑动轴承 铜合金轴套Plain bearings--Copper alloy bushes
27 GB/T 18325.1-2001
滑动轴承 流体动压润滑条件下试验机内和实际应用的滑动轴承疲劳强度
Plain bearings-Bearing fatigues -plain bearings in test rigs and in application under conditions of hydrodynamic lubrication
28 GB/T 18326-2001
滑动轴承 薄壁滑动轴承用金属多层材料Plain bearings--Multilayer materials for thin-walled plain bearings
29 GB/T 18327.1-2001
滑动轴承 基本符号Plain bearings--Basic symbols
30 GB/T 18327.2-2001
滑动轴承 应用符号Plain bearings--Applications
31 GB/T 18329.1-2001
滑动轴承 多层金属滑动轴承结合强度的超声波无损检验Plain bearings--Non-destructive ultrasonic testing of bond for metallic multilayer plain bearings
32 GB/T 18330-2001
滑动轴承 薄壁轴瓦和薄壁轴套的壁厚测量Plain bearings--Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes
33 GB/T 18331.1-2001
滑动轴承 卷制轴套外径的检测Plain bearings--Checking the outside diameter for wrapped bushes
34 GB/T 18579-2001
高碳铬轴承钢丝High-carbon chromium bearing steel wires
35 GB/T 18844-2002
滑动轴承 损坏和外观变化的术语、特征及原因Plain bearings-Terms,characteristics and causes of damage and changes in appearance
36 GB/T 19435-2004
滑动轴承用铝锡合金-钢复合带Aluminium-tin alloy and steel bimetal strip for plain bearings
37 GB/T 19673-2005
直线运动滚动支承套筒型循环球直线运动轴承附件
38 GB/T 2511-1981
滑动轴承铜合金整体轴套 技术条件Copper alloy integrated shaft sleeves--Technical requirements
39 GB/T 2685-1981
滑动轴承 粉末冶金筒形轴承型式,尺寸与公差Powder metallurgy plain bearing--Cylindrical type--Types,dimensions and tolerances
40 GB/T 2686-1981
滑动轴承 粉末冶金带挡边筒形轴承型式,尺寸与公差Powder metallurgy plain bearing--Rimed cylindrical type--Types,dimensions and tolerances
41 GB/T 2687-1981
滑动轴承 粉末冶金球形轴承型式,尺寸与公差Powder metallurgy plain bearing--Spherical type--Types,dimensions and tolerances
42 GB/T 2688-1981
滑动轴承 粉末冶金轴承技术条件Powder metallurgy plain bearing--Technical requirements
43 GB/T 271-1997
滚动轴承 分类Rolling bearings--Classification
44 GB/T 272-1993
滚动轴承 代号方法Rolling bearing. Identification code
45 GB/T 273.1-2003
滚动轴承 圆锥滚子轴承 外形尺寸总方案Rolling bearings-Tapered roller bearing-Plan of boundary dimensions
46 GB/T 273.2-1998
滚动轴承 推力轴承 外形尺寸总方案Rolling bearings--Thrust bearings--Boundary dimensions, general plan
47 GB/T 273.3-1999
滚动轴承 向心轴承 外形尺寸总方案Rolling bearings--Radial bearings--Boundary dimensions,general plan
48 GB/T 274-2000
滚动轴承 倒角尺寸最大值Rolling bearings-Chamfer dimension-Maximum values
49 GB/T 275-1993
滚动轴承与轴和外壳的配合Shaft and housing fits for rolling bearings
50 GB/T 276-1994
滚动轴承 深沟球轴承 外形尺寸Rolling bearings--Deep groove ball bearings--Boundary dimensions
51 GB/T 280-1964
带毡封圈的单列向心球轴承 结构型式和基本尺寸Rolling bearings-Single-row radial ball bearings withfelt seals-Types and basic dimensions
52 GB/T 281-1994
滚动轴承 调心球轴承 外形尺寸Rolling bearings--Self-aligning ball bearings--Boundary dimensions
53 GB/T 283-1994
滚动轴承 圆柱滚子轴承 外形尺寸Rolling bearings--Cylindrical rolling bearings--Boundary dimensions
54 GB/T 285-1994
滚动轴承 双列圆柱滚子轴承 外形尺寸Rolling bearings--Double row cylindrical roller bearings--Boundary dimensions
55 GB/T 288-1994
滚动轴承 调心滚子轴承 外形尺寸Rolling bearings--Self-aligning roller bearings--Boundary dimensions
56 GB/T 2889-1994
滑动轴承 术语Plain bearing--Terms, definitions and classification
57 GB/T 289-1964
滚针轴承 结构型式和基本尺寸Needle roller bearings--Types and basic dimensions
58 GB/T 290-1998
滚动轴承 冲压外圈滚针轴承 外形尺寸Rolling bearings--Needle roller bearings, drawn cup without inner rings--Boundary dimensions
59 GB/T 292-1994
滚动轴承 角接触球轴承 外形尺寸Rolling bearings--Angular contact ball bearings--Boundary dimensions
60 GB/T 294-1994
滚动轴承 三点和四点接触球轴承 外形尺寸Rolling bearings--Three-point and four-point contact ball bearings--Boundary dimensions
61 GB/T 296-1994
滚动轴承 双列角接触球轴承 外形尺寸Rolling bearings--Double row angular contact ball bearings--Boundary dimensions
62 GB/T 297-1994
滚动轴承 圆锥滚子轴承 外形尺寸Rolling bearings--Tapered roller bearings--Boundary dimensions
63 GB/T 299-1995
滚动轴承 双列圆锥滚子轴承 外形尺寸Rolling bearings--Metric double row tapered roller bearings--Boundary dimensions
64 GB/T 300-1995
滚动轴承 四列圆锥滚子轴承 外形尺寸Rolling bearings--Four row tapered roller bearings--Boundary dimensions
65 GB/T 301-1995
滚动轴承 推力球轴承 外形尺寸Rolling bearings--Thrust ball bearings--Boundary dimensions
66 GB/T 304.1-2002
关节轴承 分类Spherical plain bearings-Classification
67 GB/T 304.2-2002
关节轴承 代号方法Spherical plain bearings-Identification code
68 GB/T 304.3-2002
关节轴承 配合Spherical plain bearings-Fits
69 GB/T 305-1998
滚动轴承 外圈上的止动槽和止动环 尺寸和公差Rolling bearings--Snap ring groove and snap ring on outer ring--Dimensions and tolerances
70 GB/T 307.1-2005
滚动轴承 向心轴承 公差 Rolling bearings-Radial bearings-Tolerances
71 GB/T 307.2-2005
滚动轴承 测量和检验的原则及方法
72 GB/T 307.3-2005
滚动轴承 通用技术规则 Rolling bearings-General technical regulations
73 GB/T 307.4-2002
滚动轴承 推力轴承 公差Rolling bearings-Thrust bearings-Tolerances
74 GB/T 308-2002
滚动轴承 钢球Rolling bearings-Steel balls
75 GB/T 309-2000
滚动轴承 滚针Rolling bearings-Needle rollers
76 GB/T 3162-1991
滑动轴承薄壁轴瓦尺寸、结构要素与公差Plain bearings--Thin-walled bearing shells--Dimensions,structure elements and tolerances
77 GB/T 3203-1982
渗碳轴承钢 技术条件Specification for carburizing steels of bearings
78 GB/T 3882-1995
滚动轴承 外球面球轴承和偏心套 外形尺寸Rolling bearings--Insert bearings and eccentric looking collars--Boundary dimensions
79 GB/T 3944-2002
关节轴承 词汇Spherical plain bearings-Vocabulary
80 GB/T 4199-2003
滚动轴承 公差 定义Rolling bearings-Tolerances-Definitions
81 GB/T 4459.7-1998
机械制图 滚动轴承表示法Mechanical drawings--Representation of rolling bearings
82 GB/T 4528-1984
家用缝纫机 滚柱Roller complete for household sewing machines
83 GB/T 4604-1993
滚动轴承 径向游隙Rolling bearings-Radial internal clearance
84 GB/T 4605-2003
滚动轴承 推力滚针和保持架组件及推力垫圈Rolling bearings-Thrust needle roller and cage assemblies,thrust washers
85 GB/T 4648-1996
滚动轴承 圆锥滚子轴承 凸缘外圈 外形尺寸Rolling bearings--Metric tapered roller bearings--Flanged cups--Boundary dimensions
86 GB/T 4661-2002
滚动轴承 圆柱滚子Rolling bearings-Cylindrical rollers
87 GB/T 4662-2003
滚动轴承 额定静载荷Rolling bearings-Static load ratings
88 GB/T 4663-1994
滚动轴承 推力圆柱滚子轴承 外形尺寸Rolling bearings--Cylindrical thrust roller bearings--Boundary dimensions
89 GB/T 5800-2003
滚动轴承 仪器用精密轴承Rolling bearings-Instrument precision bearings
90 GB/T 5801-1994
滚动轴承 轻中系列滚针轴承 外形尺寸和公差Rolling bearings--Light and medium series needle roller bearings--Boundary dimensions and tolerances
91 GB/T 5859-1994
滚动轴承 推力调心滚子轴承 外形尺寸Rolling bearings--Self-aligning thrust roller bearings--Boundary dimensions
92 GB/T 5868-2003
滚动轴承 安装尺寸Rolling bearings-Mounting dimensions
93 GB/T 6391-2003
滚动轴承 额定动载荷和额定寿命Rolling bearings-Dynamic load rating and rating life
94 GB/T 6445.1-1996
滚动轴承 滚轮滚针轴承 外形尺寸Involute cylindrical gears--Information of the dimensional data to be given on the drawing
95 GB/T 6445.2-1996
滚动轴承 滚轮滚针轴承 公差Rolling bearings--Needle roller bearings-Track rollers--Tolerances
96 GB/T 6930-2002
滚动轴承 词汇Rolling bearings-Vocabulary
97 GB/T 7217-2002
滚动轴承 凸缘外圈向心球轴承 凸缘尺寸Rolling bearings-Radial ball bearings with flanged outer ring-Flange dimensions
98 GB/T 7218-1995
滚动轴承 凸缘外圈微型向心球轴承 外形尺寸Rolling bearings. Miniature radial ball bearings with flanged outer ring. Boundary dimensions
99 GB/T 7308-1987
滑动轴承薄壁翻边轴瓦尺寸、公差及检验方法Plain bearings--Thin-walled flanged half bearings--Dimensions, tolerances and methods of checking
100 GB/T 7631.4-1989
润滑剂和有关产品(L类)的分类 第4部分:F组(主轴、轴承和有关离合器)
Lubricants and related products (class L)--Classification--Part 4:Family F (Spindle bearings, bearings and associated clutches)
101 GB/T 7809-1995
滚动轴承 外球面球轴承座 外形尺寸Rolling bearings--Housings for insert bearing--Boundary dimensions
102 GB/T 7810-1995
滚动轴承 带座外球面球轴承 外形尺寸Rolling bearings--Insert bearing units--Boundary dimensions
103 GB/T 7811-1999
滚动轴承 参数符号Rolling bearings--Symbols for quantities
104 GB/T 7813-1998
滚动轴承附件 轴承座 外形尺寸Rolling bearings accessories--Plummer block housings--Boundary dimensions
105 GB/T 7948-1987
塑料轴承极限PV试验方法Test method for PV limit of plastics bearings
106 GB/T 8597-2003
滚动轴承 防锈包装Rolling bearings-Rust proof packaging
107 GB/T 8740-1988
铸造轴承合金锭Bearing alloy ingots for casting
108 GB/T 9161-2001
关节轴承 杆端关节轴承Spherical plain bearings--Spherical plain bearings rod ends
109 GB/T 9162-2001
关节轴承 推力关节轴承Spherical plain bearings--Thrust spherical plain bearings
110 GB/T 9163-2001
关节轴承 向心关节轴承Spherical plain bearings--Radial spherical plain bearings
111 GB/T 9164-2001
关节轴承 角接触关节轴承Spherical plain bearings--Angular contact radial spherical plain bearings
连轴器
1 GB/T 10614-1989
芯型弹性联轴器Resilient coupling with core element
2 GB/T 12458-2003
联轴器分类Coupling-Classfication
3 GB/T 12922-1991
弹性阻尼簧片联轴器Elastic damping leaf coupling
4 GB/T 14653-1993
挠性杆联轴器Flexible link coupling
5 GB/T 2496-1996
弹性环联轴器Coupling with flexible ring
6 GB/T 3507-1983
机械式联轴器公称扭矩系列Nominal torque series of the mechanical coupling
7 GB/T 3852-1997
联轴器轴孔和联结型式与尺寸Types and dimension for coupling bores and their connection
8 GB/T 3931-1997
联轴器 术语Coupling--Vocabulary
9 GB/T 4323-2002
弹性套柱销联轴器Pin coupling with elastic sleeve
10 GB/T 5014-2003
弹性柱销联轴器Pin coupling elastomer
11 GB/T 5015-2003
弹性柱销齿式联轴器Gear coupling with pin elastomer
12 GB/T 5047-1985
牙科手机 联轴节尺寸Dental hand pieces--Coupling dimensions
13 GB/T 5272-2002
梅花形弹性联轴器Coupling with elastic spider
14 GB/T 5843-2003
凸缘联轴器Flange coupling
15 GB/T 5844-2002
轮胎式联轴器Coupling with rubber type element
16 GB/T 6069-2002
滚子链联轴器Roller chain coupling
17 GB/T 7549-1987
球笼式同步万向联轴器型式、基本参数和主要尺寸Synchronizing universal coupling with ball and sacket--Type,foundational parameters and main dimensions
18 GB/T 7550-1987
球笼式同步万向联轴器 试验方法Synchronizing universal coupling with ball and sacket
销
1 GB/T 117-2000
圆锥销Taper pins
2 GB/T 118-2000
内螺纹圆锥销Taper pins with internal thread
3 GB/T 119.1-2000
圆柱销 不淬硬钢和奥氏体不锈钢Parallel pins,of unhardened steel and austenitic stainless steel
4 GB/T 119.2-2000
圆柱销 淬硬钢和马氏体不锈钢Parallel pins, of hardened steel and martensitic stainless steel(Dowel pins)
5 GB/T 120.1-2000
内螺纹圆柱销 不淬硬钢和奥氏体不锈钢Parallel pins with internal thread,of unhardened steel and austenitic stainless steel
6 GB/T 120.2-2000
内螺纹圆柱销 淬硬钢和马氏体不锈钢Parallel pins with internal thread,of hardened steel and martensitic stainless steel
7 GB/T 121-1986
销技术条件Specifications for pins
8 GB/T 13683-1992
销 剪切试验方法Pins and grooved pins--Shear test
9 GB/T 13829.1-2004
槽销 带导杆及全长平行沟槽Grooved pins-Full-length parallel grooved,with pilot
10 GB/T 13829.2-2004
槽销 带倒角及全长平行沟槽Grooved pins-Full-length parallel grooved,with chamfer
11 GB/T 13829.3-2004
槽销 中部槽长为1/3全长Grooved pins-One-third-length centre grooved
12 GB/T 13829.4-2004
槽销 中部槽长为1/2全长Grooved pins-Half-length centre grooved
13 GB/T 13829.5-2004
槽销 全长锥槽Grooved pins-Full-length taper grooved
14 GB/T 13829.6-2004
槽销 半长锥槽Grooved pins-Half-length taper grooved
15 GB/T 13829.7-2004
槽销 半长倒锥槽Grooved pins-Half-length reverse-taper grooved
16 GB/T 13829.8-2004
圆头槽销Grooved pins with round head
17 GB/T 13829.9-2004
沉头槽销Grooved pins with countersunk head
18 GB/T 5014-2003
弹性柱销联轴器Pin coupling elastomer
19 GB/T 5015-2003
弹性柱销齿式联轴器Gear coupling with pin elastomer
20 GB/T 5278-1985
紧固件 开口销孔和金属丝孔Fasteners--Split pin holes and wire holes
21 GB/T 7726.3-1998
铰接式客车机械连接装置 球头销Mechanical connections of articulated bus. Ball pin
22 GB/T 877-1986
开尾圆锥销Taper pins with split
23 GB/T 878-1986
螺纹圆柱销Parallel pins with external thread
24 GB/T 879.1-2000
弹性圆柱销 直槽 重型Spring-type straight pins-Slotted,heavy duty
25 GB/T 879.2-2000
弹性圆柱销 直槽 轻型Spring-type straight pins-Slotted,light duty
26 GB/T 879.3-2000
弹性圆柱销 卷制 重型Spring-type straight pins-Coiled,heavy duty
27 GB/T 879.4-2000
弹性圆柱销 卷制 标准型Spring-type straight pins-Coiled,standard duty
28 GB/T 879.5-2000
弹性圆柱销 卷制 轻型Spring-type straight pins-Coiled,light duty
29 GB/T 880-1986
带孔销Pins with split pin hole
30 GB/T 881-2000
螺尾锥销Taper pins with external thread
31 GB/T 882-1986
销轴Clevis pins with head
32 GB/T 883-1986
锥销锁紧挡圈Lock rings with cone pin
33 GB/T 91-2000
开口销Split pins
34 GB/T 9297-1988
铝合金插销Bolts for side hung aluminium alloy doors
35 GB/T 9446-1988
焊接用插销冷裂纹试验方法Welding--Cold cracking test method using implants
36 GB/T 97.3-2000
销轴用平垫圈Plain washers for clevis pins
摩擦片
1 GB/T 10430-1989
烧结金属摩擦片结合强度测定方法Standard test method for binding strength of sintered metal friction elements
2 GB/T 11834-2000
工业机械用石棉摩擦片Asbestos friction linings for industrial machines
3 GB/T 11863-1989
制动蹄摩擦片切削机Machine for cutting friction lining of brake shoe
4 GB/T 12065-1989
制动蹄摩擦片钻铆磨机The equipment for drilling rivetting and grinding brake-shoe lining
离合器
1 GB/T 10042-2003
离合器术语Clutch - Terminology
2 GB/T 10043-2003
离合器分类Clutch - Classification
3 GB/T 15096-1994
液粘调速离合器Hydroviscous varialbe speed clutch
4 GB/T 15141-1994
湿式离合器摩擦元件 试验方法Test method for friction element of wet clutch
5 GB/T 3871.5-1993
农业轮式和履带拖拉机试验方法 第5部分 转向和离合器操纵试验Test methods for agricultural wheeled and tracklaying tractors . Part 5: Turning and clutch operating tests
6 GB/T 5764-1998
汽车用离合器面片Clutch facings for automobiles
7 GB/T 6073-1985
LT型高弹性摩擦离合器Type LT highly elastic friction clutch
8 GB/T 7631.4-1989
润滑剂和有关产品(L类)的分类 第4部分:F组(主轴、轴承和有关离合器)Lubricants and related products (class L)--Classification--Part 4:Family F (Spindle bearings, bearings and associated clutches)
9 GB/T 9149-1988
磁粉离合器通用技术条件General specification for magnetic particle clutch
铆钉
1 GB/T 1011-1986
大扁圆头铆钉Truss head rivets
2 GB/T 1012-1986
120°半沉头铆钉120 degree oval countersunk rivets
3 GB/T 1013-1986
平锥头半空心铆钉Cone head semi-tubular rivets
4 GB/T 1014-1986
大扁圆头半空心铆钉Truss head semi-tubular rivets
5 GB/T 1015-1986
沉头半空心铆钉Countersunk head semi-tubular rivets
6 GB/T 1016-1986
无头铆钉Headless rivets
7 GB/T 109-1986
平头铆钉Flat head rivets
8 GB/T 11096-1989
贵金属及其合金铆钉型复合电触点材料Precious metals and their alloys--Bimetal electrical contacts of rivet type
9 GB/T 116-1986
铆钉技术条件Specifications for rivet
10 GB/T 12615.1-2004
封闭型平圆头抽芯铆钉 11级Closed end blind rivets with break pull mandrel and protruding head-Property class 11
11 GB/T 12615.2-2004
封闭型平圆头抽芯铆钉 30级Closed end blind rivets with break pull mandrel and protruding head-Property class 30
12 GB/T 12615.3-2004
封闭型平圆头抽芯铆钉 06级Closed end blind rivets with break pull mandrel and protruding head-Property class 06
13 GB/T 12615.4-2004
封闭型平圆头抽芯铆钉 51级Closed end blind rivets with break pull mandrel and protruding head-Property class 51
14 GB/T 12615-1990
封闭型扁圆头抽芯铆钉Mushroom head break mandrel closed end blind rivets
15 GB/T 12616.1-2004
封闭型沉头抽芯铆钉 11级Closed end blind rivets with break pull mandrel and countersunk head-Property class 11
16 GB/T 12617-1990
开口型沉头抽芯铆钉120 deg flush head break mandrel blind rivets
17 GB/T 12618-1990
开口型扁圆头抽芯铆钉Mushroom head break mandrel blind rivets
18 GB/T 15049.3-1996
CAD 标准件图形文件 几何图形和特性规范 铆钉CAD standard parts file--Specification of geometry and parameters--Revets
19 GB/T 152.1-1988
紧固件 铆钉用通孔Fasteners--Clearance holes for rivets
20 GB/T 15855.1-1995
扁圆头击芯铆钉Flat round head drive rivets
21 GB/T 15855.2-1995
沉头击芯铆钉Countersunk head drive rivets
22 GB/T 15855.3-1995
击芯铆钉技术条件Specifications for drive rivets
23 GB/T 18194-2000
铆钉杆径Rivet shank diameters
24 GB/T 3098.18-2004
紧固件机械性能 盲铆钉试验方法Mechanical properties of fasteners-Blind rivets testing
25 GB/T 3098.19-2004
紧固件机械性能 抽芯铆钉Mechanical properties of fasteners-Blind rivets with break pull mandrel
26 GB/T 3099.2-2004
紧固件术语 盲铆钉Terminology of fasteners-Blind rivets
27 GB/T 3196-2001
铆钉用铝及铝合金线材Aluminium and aluminium alloy wires for riveting purpose
28 GB/T 3250-1982
铝及铝合金铆钉线铆接试验方法Aluminum and aluminum alloys--Riveting test method for rivet wire
29 GB/T 3252-1982
铝及铝合金铆钉线与铆钉剪切试验方法Aluminum and aluminum alloys--Shear test method for rivet wire and rivets
30 GB/T 6400-1986
金属丝材和铆钉的高温剪切试验方法High temperature shear test method for metals wires and rivets
31 GB/T 827-1986
标牌铆钉Rivets for name plate
32 GB/T 863.1-1986
半圆头铆钉(粗制)Round head rivets--Black
33 GB/T 863.2-1986
小半圆头铆钉(粗制)Round head rivets with small head--Black
34 GB/T 864-1986
平锥头铆钉(粗制)Cone head rivets--Black
35 GB/T 865-1986
沉头铆钉(粗制)Countersunk head rivets--Black
36 GB/T 866-1986
半沉头铆钉(粗制)Oval countersunk head rivets--Black
37 GB/T 867-1986
半圆头铆钉Round head rivets
38 GB/T 868-1986
平锥头铆钉Cone head rivets
39 GB/T 869-1986
沉头铆钉Countersunk head rivets
40 GB/T 870-1986
半沉头铆钉Oval countersunk head rivets
41 GB/T 871-1986
扁圆头铆钉Flat round head rivets
42 GB/T 872-1986
扁平头铆钉Thin head rivets
43 GB/T 873-1986
扁圆头半空心铆钉Oval head semi-tubular rivets
44 GB/T 874-1986
120°沉头半空心铆钉120 degree countersunk head semi-tubular rivets
45 GB/T 875-1986
偏平头半空心铆钉Thin head semi-tubular rivets
46 GB/T 876-1986
空心铆钉Tubular rivets
47 GB/T 8910.2-2004
手持便携式动力工具 手柄振动测量方法 第2部分：铲和铆钉机Hang-held portable power tools—Measurement of vibrations at the handle—Part 2:Chipping hammers and riveting hammers
48 GB/T 954-1986
120°沉头铆钉120 degree countersunk head rivets
49 GB/T 975-1986
管状铆钉Pipe type rivets
50 GBN 248-1985
铆钉专用技术条件Special specification for rivets
挡圈
1 GB/T 15049.8-1996
CAD 标准件图形文件 几何图形和特性规范 挡圈CAD standard parts file--Specification of geometry and parameters--Rings
2 GB/T 883-1986
锥销锁紧挡圈Lock rings with cone pin
3 GB/T 884-1986
螺钉锁紧挡圈Lock ring with screw
4 GB/T 885-1986
带锁圈的螺钉锁紧挡圈Lock rings with screw and circlip
5 GB/T 886-1986
轴肩挡圈Rings for shoulder
6 GB/T 891-1986
螺钉紧固轴端挡圈Lock rings at the end of shaft with screw
7 GB/T 892-1986
螺栓紧固轴端挡圈Lock rings at the end of shaft with bolt
8 GB/T 893.1-1986
孔用弹性挡圈 A型Circlips for holes--Type A
9 GB/T 893.2-1986
孔用弹性挡圈 B型Circlips for hole--Type B
10 GB/T 894.1-1986
轴用弹性挡圈 A型Circlips for shaft--Type A
11 GB/T 894.2-1986
轴用弹性挡圈 B型Circlips for shaft--Type B
12 GB/T 895.1-1986
孔用钢丝挡圈Roundwire snap rings for hole
13 GB/T 895.2-1986
轴用钢丝挡圈Roundwire snap rings for shaft
14 GB/T 896-1986
开口挡圈"E" rings
15 GB/T 959.1-1986
挡圈技术条件 弹性挡圈Specifications for ring--Circlips
16 GB/T 959.2-1986
挡圈技术条件 钢丝挡圈Specifications for ring--Round wire snap rings
17 GB/T 959.3-1986
挡圈技术条件 切制挡圈Specifications for ring--Cutting rings
18 GB/T 960-1986
夹紧挡圈Grip rings